Chemical : Base Epoxy resin.
Density : ~1.65 kg/l (part A+B mixed) (at +20°C)
Sag Flow : On vertical surfaces it is non-sag up to 10 mm
thickness.(According to EN 1799)
Layer Thickness : 30 mm max.
When using multiple units, one after the other,
do not mix the following unit until the previous
one has been used in order to avoid a
reduction in handling time.
Change of Volume : Shrinkage / Creep:
Hardens without shrinkage.
Thermal Expansion Coefficient W: 5.0 x 10-5 per °C (Temp. range:
: -20°C to +40°C) (According EN 1770)
Easy to mix and apply
Suitable for dry and damp concrete surfaces .
Very good adhesion to most construction materials.
Excellent permeability resistant.
High strength adhesive.
Thixotropic: non-sag and suitable for vertical and overhead application
Solvent free.
Hardens without shrinkage.
Different coloured components (for mixing control).
High initial and ultimate strengths
Good abrasion resistance
Adhesive and filler in one
Impermeable to liquids and water vapour
As a structural adhesive for:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, Bricks, Blocks, Masonry etc.
Steel, Iron, Aluminium
Wood
Polyester, Epoxy
Glass.
As a fast setting repair mortar for:
Corners and edges
Hole and void filling
Joint arrises.
Joint filling and crack sealing:
Rigid joint filling
Crack filling and sealing (non moving).
6 kg (A+B) Prebatched unit, Pallets of 510 kg (85 x 6 kg).
1.2 kg (A+B) Prebatched unit, in boxes of 9 x 1.2 kg
Part A : white
Part B : dark grey
Part A+B mixed :
concrete grey.